Raspberry Pi 3 Robot Image – Details
Image Use – first connect a HDMI screen and USB keyboard and mouse. Then configure the wifi. Once Wifi is configured, it will boot automatically and you do not need …
Sticker
Manual In order to improve the look, you can print belows file with your printer or order it as sticker on the internet. The file contains the eyes and stomach. …
Parts to 3D-print or order
Manual Print the following parts yourself on a 3D printer or get them from an external 3D print service (see links below). The parts use the unit “mm”, usually you …
PCB Layout to order
Manual You can order the needed PCB for example at one of the following links. Usually all standard settings will be fine, it is a 2 layer PCB. If you …
Standard parts to buy
NOTE: The used RC-Servos that are mentioned below did break quite often. I recommend looking for more robust ones in the same standard size. I found this robot http://www.feetechrc.com/product/ft-robot/feetech-completely-assembled-bipedal-humanoid-robot-ft-17dof-sc-rtp/ to …